Overview ...........................................................................................................................3
Getting started ..................................................................................................................3
Features ............................................................................................................................4
Components .....................................................................................................................4
Installation .........................................................................................................................5
Determine the location ..................................................................................................5
Pre-installation test........................................................................................................6
Drill holes for wiring .......................................................................................................6
Mount the PIM400-485 .................................................................................................7
Wire routing ...................................................................................................................8
Retrofit...........................................................................................................................8
Optional remote antenna ................................................................................................12
Link mode .......................................................................................................................12
Reset to factory defaults .................................................................................................12
DC power ........................................................................................................................13
Troubleshooting ..............................................................................................................13
FCC / IC statements.........................................................................................................15
To comply with FCC and Industry Canada RF radiation exposure limits for general
population, the antenna(s) used for this transmitter must be installed such that a minimum
separation distance of 20cm is maintained between the radiator (antenna) and all persons
at all times and must not be co-located or operating in conjunction with any other antenna or
transmitter.
This product is compliant of UL 294 and ULC S319 standard. This product's compliance
would be invalidated through the use of any add-on, expansion, memory or other module
that has not yet been evaluated for compatibility for use with this UL Listed product, in
accordance with the requirements of the Standards UL 294 and ULC S319. This product has
been evaluated for ULC-S319 Class I.
2 • Schlage • PIM400-485 user guide
Contents