Schlage PIB300 User Manual page 811

Installing/Starting Schlage Express
Starting Schlage Express
Starting Schlage Express requires an Operator Name and Password, usually obtained from the Facility Manager.
1. Double-click the Schlage Express icon on the
desktop.
2. Type your operator name and password in the
corresponding fields, then click OK.
3. The system displays the Schlage Express Main
Window. You are now ready to use the Schlage
Express software.
Î NOTE: The Facility name is in the lower left
corner. If this is not the facility for which you need
to make changes,go to Facility>Open Facility and
choose the correct Facility.
24 • Schlage • Schlage Express Software Manual