Schlage PIB300 User Manual page 870

Generating Program Files
After you have assigned users, access rights, timezones and holidays to the doors in your facility, you must program the doors in
order to transfer the information. Each time a change is made to a user, door, access right, timezone or holiday, each door that is
affected by the change must be reprogrammed.
The process for generating program files for online and offline doors is slightly different.
Generate Program Files for Offline Doors
Be sure that your HHD is connect to the PC prior to generating program files.
1. Click Generate Program Files in Main Window.
Î NOTE: The Generate Program Files item flashes when doors require
programming, and indicates number of doors affected.
2. You can choose to show all
the doors in the system or
show only those that require
programming.
3. All doors that need to be
programmed will be selected
by default. Click the check box
next to any door you do not
want to program to deselect it.
4. Click Generate Program Files.
5. Offline doors are not
programmed at this point. You
still need to physically tour
each door. See Programming
a Lock on page 85 for more
information.
Generate Program Files for Online Doors
1. Click Generate Program Files in Main Window.
Î NOTE: The Generate Program Files item flashes when doors require
programming, and indicates number of doors affected.
2. You can choose to show all the doors in the system or show only those that
require programming.
3. All doors that need to be programmed will be selected by default. Click
the check box next to any door you do not want to program to deselect
it.
4. Click Program Networked Doors.
5. Online doors are automatically programmed once the program files
have been generated. You do not need to do anything else to program
the doors.
Schlage • Schlage Express Software Manual • 83