Schlage PIB300 User Manual page 813

Setting Up the Site/Quick Start
Setting the Facility Backup Location
Always back up the facility and store
the backup file in a safe location.
Failure to back up the facility risks
complete data loss.
1. In the Program Settings
window, select the Backup tab.
2. Click the Prompt before backing
up Facility check box if you
want a reminder prompt to
appear each time you close the
facility. Otherwise, Schlage
Express backs up the facility
automatically when you close
the facility.
3. To change the location of the
backup folder, click Change
Folder. The Select Path Window
will open. The default location is
C:\Schlage Express\
4. Navigate to the new location in
the Select Path window, click
OK.
Î Note: You should always copy
your backed up databases to a
network share, another hard
drive, or external USB Drive. If
your computer fails your
databases are safe, secure, and recoverable.
5. Click Save. DO NOT click Close at this time.
Setting the Synchronization Folder
Microsoft® ActiveSync® or Windows Mobile
Device® created a synchronization folder on the
desktop PC that the HHD uses to synchronize files
with the desktop PC. Schlage Express must know
that location. The following procedure identifies the
location of the synchronization folder so that
Schlage Express can use it.
1. In the Program Settings window, select the
Programming tab.
2. Click Locks will be programmed with a Pocket
PC device (the HHD).
3. Click Change Folder. The Select Path window
will open. The default location is: C:\Schlage
Express\Export
4. In the Set Path window, locate and select the
folder that you recorded during the Installing
Microsoft® ActiveSync® section.
5. Click OK. The Set Path window will close.
6. In the Program Settings window, click Save,
then click Close.
26 • Schlage • Schlage Express Software Manual