Schlage PIB300 User Manual page 804

HHD Setup
Finding the synchronization folder:
The following steps will show you where the synchronization folder is located on your computer.
To find the synchronization folder:
1. If the WMDC is not already open, do the following:
a. Double-click the WMDC icon in the system tray.
b. In the Synchronization window, double-click the icon labeled, Administrator's PDA. The WMDC window appears.
3. In the WMDC window, under the Mobile Device category:
a. Click Change content sync settings. The WMDC window displays a list of items that can be changed.
d. In the list of items, click to check the Files check box (If it isn't already checked).
e. Under Files, click Sync Settings. The following statement will appear:
On this computer, synchronize the files in this folder:
• A path to a synchronization folder is shown under that statement.
6. Make note of the path to the sync. folder. This information will be needed in a later step.
Changing the Path to the Synchronization Folder:
1. In the Schlage Express main menu:
a. Click Settings.
b. In the drop-down menu, click Program Settings. A Program Settings window appears.
3. In the Program Settings window:
a. Click the Programming tab.
d. Click to select the radio button for Locks will be programmed with a Pocket PC device.
e. Click the Change Folder button associated with that field. The Select Path window will open.
f. Navigate to and select the synchronization folder.
g. Click OK. The selection window will close and the new path appears in the synchronization folder block of the Schlage
Express Program Settings window.
h. Click Save.
Schlage • Schlage Express Software Manual • 17