Schlage PIB300 User Manual page 262

Hide thumbs Also See for PIB300:

Table of Contents

Programming the HandPunch

Set Language

The Set Language command allows the language shown on the HandPunch's

display to be "localized" for a variety of countries:

The Set Date Format Command allows the date format shown on the

HandPunch's display to be "localized" for a variety of countries.

The Set Time and Date command allows the HandPunch's time and date to be

set. This is normally not necessary as the HandPunch's time and date are set

by the host computer.

Table 9: Setup Command Menu

Verify/Enter IP Address

Verify/Enter Gateway

Verify/Enter Host Bit

Set Output Mode

For Lock & Auxiliary (Y/N)

For Card Reader Output (Y/N)

The Set Serial command has different

values based on whether the HandPunch

unit is configured for serial or modem

communication versus Ethernet

communication.

Password = 2

Show Quick Links

Chapters

Table of Contents