Readers; Users - Schlage PIB300 User Manual

Monitoring Ongoing Activity

Readers

Users

110
This tab lets you limit to activity that occurred at certain readers. For example,
you might want to limit activity only to the readers controlling the entrances
to the building so you could see who has come in. Or you might want to limit
activity to the readers controlling the most secure areas so you could monitor
them more closely.
Any reader: Leave this selected to not limit the activity based on site.
A reader named: This option is permanently disabled. To get activity for a
single reader, use the following option and select only that one reader in the
list.
The readers selected below: To limit the report/view to specific readers, click
this and then select the readers to include activity from.
To select a single reader: Click that reader in the list.
To select multiple readers that are together on the list: Click the first
reader in the group, hold the SHIFT key down, and click the last reader
that you want to select.
To select multiple readers that are not together on the list: Click the
first reader to select, hold the CTRL key down, and click each other
reader that you want to select.
This screen lets you limit to activity that occurred for certain users.
Any user: Leave this selected to not limit the activity to particular users.
A user named: This option is permanently disabled. For a single user, use
the following option and select only that one user in the list.