Schlage PIB300 User Manual page 950

Configuration Tab
Configuration Tab
The Configuration tab
is used to add or edit
networks, readers and card
formats.
Managing
Networks
A network is a group of
up to 32 daisy-chained
readers connected though
a single serial port using 2
wire RS485, a single reader
connected to a computer
with RS232, or a single
TCP/IP (ethernet) reader.
(See the reader manual
for wiring and connection
detail.)
You control access to each reader separately using HandNet Lite, so having readers with unrelated purposes in one network is
fine.
There are two parts to setting up a network and readers: you must physically set the readers up and connect them to each other
and to the computer, and you must add the network and readers in HandNet Lite. This manual only explains how to set up the
network and readers in HandNet Lite. For help setting up and connecting the readers, see the manual that came with the readers.
Add a Network
1. Click the Configuration tab.
2. Click the Create new network button
3. Choose the Network type from the drop-down box. The remaining fields displayed will be determined by this selection.
4. Complete the fields on the screen. See
serial port on page 23.
5. Click Accept settings.
Edit a Network
1. Click the Configuration tab.
2. Select the network you want to edit from the drop-down box.
3. Click the Edit selected network button
4. Complete the fields on the screen. See
serial port on page 23.
5. Click Accept settings.
Delete a Network
Only networks with no readers can be deleted.
1. Click the Configuration tab.
2. Select the network you want to delete from the drop-down box.
3. Click the Edit selected network button
4. Click the Delete this network check box.
5. Click Accept settings.
Figure 10.1: Configuration Tab
Connecting through a TCP/IP network
Connecting through a TCP/IP network
on page 22 and Connecting through a
on page 22 and Connecting through a
Schlage • HandNet Lite Terminal User's Guide • 21