Schlage PIB300 User Manual page 846

SmarTime (SMT)
Edit a Door AutoUnlock
1. Click SmarTime (SMT).
2. Click Door AutoUnlocks.
3. Click to highlight the name of the door AutoUnlock
you want to edit.
4. Click Edit.
5. Enter the name in the Name box.
• A name is required and must be between one (1) and thirty-two (32) characters long. The name cannot contain the tab
character or the pound (#) sign.
6. Set the Start Time and the End Time.
• The time boxes are divided into four parts: hour,
minute, second and day part. To enter the time,
click on the time part you want to change. Then either type the value or use the arrow buttons on the right of the time box
to increase or decrease the time.
• If the start time and the end time are the same, the lock will be set to secured mode (locked) at that time.
7. Check the box below each day of the week for
which the user time zone will be in effect.
8. Click Save.
9. If you have entered the same time for the start and end times, a window will appear to confirm the creation of a secured mode
AutoUnlock. If you intended to create this kind of AutoUnlock, click OK. If you did not intend to create this kind of AutoUnlock,
click Cancel and go back to step 5.
Î NOTE: The AutoUnlock will not be changed on the door until the door is reprogrammed.
Delete a Door AutoUnlock
1. Click SmarTime (SMT).
2. Click Door AutoUnlocks.
3. Click to highlight the name of the door AutoUnlock
you want to delete.
4. Click Delete.
5. Click Yes.
Î NOTE: The AutoUnlock will still be active on the door until the door is reprogrammed.
Schlage • Schlage Express Software Manual • 59