Schlage PIB300 User Manual page 1128

Setting Up Sites and Readers
Settings
46
1. Pick Settings from the View menu.
2. Click the Security tab.
3. Check the box by Do not delete unauthorized enrollments (see page
23 for more about what this option does. After you have gotten your
users from the reader, you may want to check this box again).
If you enable both the site and the reader without changing this setting,
HandNet will regard all of the users in the reader as unauthorized
(because they are not in HandNet yet) and it will delete them from the
reader. Once it deletes them, there is no way to get them back without
adding and enrolling the users again.
Status: This indicates whether the reader
is connected.
This screen controls the reader's
display and other factors that affect
what happens when the user enter
an ID number at the reader.
12 Hour Display: If you check this, the
reader displays times after noon
using the numbers one through
twelve; if it is not checked, it uses
twenty-four hour time. For example, if
this is checked 5:00 PM displays on
the reader as 5:00; if this is not checked, 5:00 PM displays as 17:00.
Display System Status: Do not check this option unless asked to by one of
our support staff. This displays technical information on the reader display
about the status of different aspects of the reader. It is not relevant to
normal use of the reader.
Beeper On: If this is checked, the reader beeps each time you press a button
on it; if this is not checked, the reader does not beep. In a high security
setting, you might want the beeps off to make it harder for a casual
observer to figure out how many digits are in the ID number. In other
contexts, your choice here depends only on your preference; some people
like the beeps since it lets them know that they have not missed the button;
others prefer not to hear them.
Time and Attendance Mode: Do not check this option. If you check this, the
reader asks users for additional information related to time and attendance
tracking (whether one is coming in or out or leaving for a job, the job
number you are working on, etc.). However, HandNet is currently NOT able
to store or track this information.
Emulate Card Reader: If you want the readers to send output directly to a lock
and unlock it, leave this unchecked. If you have an access control panel
and want the reader to send information formatted like card output to that
control panel, check this box.
Facility Code: This only applies if you are emulating a card reader.