Schlage PIB300 User Manual page 880

Appendix B: ProxXLator
Split Data
The Split Data window of the ProxXLator
application is accessed by clicking on the
Split Data tab at the top of the window.
Card Data: This field displays the raw card
data of the proximity credential. The data
can be manually entered into this field or
populated by an enrollment reader.
Bit Data: This field displays the bit data of
the proximity credential.
Hotstamp No.: These fields display the
converted Hotstamp information of the
credential. The card format of the
credential will determine which fields will
populate. Multiple fields will populate if the
data lends itself to multiple formats.
Facility Code: These fields display the
converted Facility Code information of the
credential. The card format of the
credential will determine which fields will populate. Multiple fields will populate if the data lends itself to multiple formats.
Version: This field will display the version information for the Proxif format only.
Split Data: Clicking this button converts the information from the Card Data field into the other fields.
Com Port: If reading credential information from a lock or serial reader, use this drop down to specify which port it is connected to.
Read From Lock: If reading credential information from a lock, present the card to the lock and then click this button, the card
information will populate the Card Data field.
Read from USB: If reading credential information from a USB reader, present the card to the reader and then click this button. The
information will populate the Card Data field.
Reinitialize USB: If the USB reader is connected to the computer after the ProxXLator application has been started, click this
button to enable the USB reader.
Schlage • Schlage Express Software Manual • 93