Adding Or Changing A Site; Adding A Site; Changing A Site; Name - Schlage PIB300 User Manual

Setting Up Sites and Readers

Adding or Changing a Site

Adding a Site

Changing a Site

Name

Type of
Connection
34
Q
1. Click Site on the main menu bar at the top of the screen, and then pick Add
U
Site. This starts the New Site Wizard.
2. Complete each screen and then click the Next button at the bottom of the
I
screen. The screens that you see in this process vary depending on whether
C
the site is connected to the computer by a serial cable, through a network, or
K
by a modem.
3. On the final screen, indicate whether to enable site
S
If the site is physically set up and connected: Enable the site now. Check
T
the Enable Site box and then click Finish.
E
If the site is not physically set up yet: Enable the site later. To do this, you
P
will open the Network window, double-click the site in the left pane
S
of the window to open up the site properties, check the Enabled box,
and then click OK.
Click Site on the main menu bar at the top of the screen, and then pick Add Site.
This starts the New Site Wizard.
Click a site in the left pane of the Network window, pick Properties from the Site
menu, and then click the tab with the information you need to change.
This is the first screen in the process of adding a new site. Enter a name that
identifies the site, and then click the Next button.
When adding a new site, this screen lets you indicate how HandNet will
communicate with the site.
Adding a Site in HandNet