Schlage PIB300 User Manual page 348

Hide thumbs Also See for PIB300:

Table of Contents

Enter a Command Menu

for the Management Menu.

for the Enrollment Menu.

for the Security Menu.

6. If you are authorized to use this command the first command option in the selected

menu appears.

7. If you are not authorized to enter this command the display appears as follows.

To access all five menus you must be the first person enrolled in a new system

installation or you must have the highest authority level and the correct passwords for all

five menus. If you are blocked from a menu to which you should have access, verify your

access/password rights with management personnel. If authority levels or passwords

have been incorrectly changed and you must have access to all menus, it is possible to

reset the HandReader's memory. Resetting memory allows access to all five menus by

the first person enrolled (as if it is a new system installation), but this means that any user

information programmed into the HandReader must be re-entered (manually or by using

HandNet software to restore the user information). Be sure you need to reset memory

before performing this function. To reset memory, refer to the Erasing HandReader

Memory on page 29.

Once an operator has entered a command menu, there are three options available for

navigating the command menu system.

to enter the command shown on the display.

to step to the next command in the menu.

to exit the command menu (pressing any numeric key also exits the

command menu). If the operator is in a command's sub-menu, the operator may have

multiple times to completely exit the command menu.

Show Quick Links

Chapters

Table of Contents