Schlage PIB300 User Manual page 1207

hand. Once it recognizes your hand, this display looks like this:
4. Type 1 and press ENTER or # (this is the standard password for the Service
menu in the reader; if you have changed this on the Passwords screen in
the Reader Properties, enter the password you have set up). The display
should now look like this:
If the reader shows the READY screen again instead of this screen, either
you placed your hand improperly or you do not have the rights to do this;
carefully check step one again.
5. Press the YES/# button. This display should now look something like this:
(The actual numbers on the first line may be different).
6. Press the YES/# button again. After telling you to please wait, you will see
the Calibrate No/Yes display again. At this point, the reader should be
recalibrated.
7. Press the CLEAR button to leave the Service menu and return to the reader
to its normal display.
* * * * *
CALIBRATE
* NO YES #
r0 c0 e100 s
RECAL (Y#/N*)?:
HandNet for Windows
125