Schlage PIB300 User Manual page 258

Programming the HandPunch
Service Menu
The Service menu commands provide information that help you determine if
the HandPunch is performing within normal operating parameters and identify
the status of the unit's inputs and outputs. The following section provides a
brief summary of the Service Menu commands.
There are no user serviceable parts inside the HandPunch.
NOTE
Navigating
Enter the appropriate password to enter the Service command menu. Once
the Service
you have entered the command menu, there are three options available for
Command
navigating the command menu system.
Menu
•
•
•
Service
There are two commands available from the Service command menu.
Commands
•
•
Refer to Table 7 and identify the command you need to perform. Step through
all previous commands until you reach the desired command.
54
#
Press to enter the command shown on the display.
*
Press to step to the next command in the menu.
Press CLEAR to exit the command menu (pressing any numeric key also
exits the command menu). If you are in a command's sub-menu, press
CLEAR multiple times to completely exit the command menu.
Calibrate
Status Display
Table 7: Service Command Menu
Calibrate
Recal (Y/N)
Status Display
On/Off (Y/N)
Service Menu
Password = 1