Table of Contents
Advertisement
Users Tab
Enroll Users
Users must be enrolled on a reader. For help enrolling users, see the reader's manual.
A user may be added to HandNet Lite in one of two ways:
•
Enroll the user at a reader before entering the user in HandNet Lite. If the reader is connected, the user is automatically
added to HandNet Lite. If users are enrolled in readers before they are connected to HandNet Lite, when the reader is initially
connected to HandNet Lite, all users are imported then.
If a user is enrolled first, the user ID in the reader (the Credential ID) is used in HandNet Lite for the user's First name, Last
name, and Unique ID (an identifier used only by HandNet Lite to help distinguish users with similar names). Edit these entries
by selecting the user in the Users window and clicking the Edit selected user button; see Edit Fingerprint Settings page 41.
•
Enter the user in HandNet Lite before enrolling the user in a connected reader. Enter the user in the User edit window.
See
Add a User
on page
zero (0) in column E). See
HandNet Lite will import the finer template.
Î When enrolling users at the reader, you must completely leave the reader's command menus before HandNet Lite will detect
the enrollments.
Problems with User Enrollment
Since bypassing finger or hand recognition gives you reduced security, it should only be used as a last resort. Try these options
first:
•
The user might have placed the finger or hand badly during the initial enrollment.
1.
Remove the user from the reader.
2.
Instruct the user on correct finger or hand placement. Make sure the user is placing the right finger.
3.
Add the user again. This creates a new template for the user.
•
If using a FingerKey, Remove the user, and enroll the user again using different fingers. Try the thumb if other fingers don't
work
•
If the user has a mild disability that prevents consistent finger or hand placement, change the user's reject level. See
Biometric Threshold
on page
appropriate reject setting for the user.
If these options aren't possible, or if you try them and they don't work, then check the Verify on ID only (no biometric verification)
box on the User edit screen. See
Adding a Special User
When using a FingerKey, if a user's fingerprint cannot be scanned (for any reason), the user can be added as a special user.
Special users are still required to place a finger on the scanner, but the scanner does not try to match a finger template.
If a user has unrecognizable fingerprints, severe arthritis, or other conditions that keep the user's finger from being recognized, you
can give the user access without finger recognition. If you choose this, the reader still asks the user to place a finger on the reader
so it won't be apparent to others that finger recognition isn't required, but the reader doesn't check the finger template; it gives
access regardless of whose finger is placed there.
8 • Schlage • HandNet Lite Terminal User's Guide
9
for more information. The user will be listed as unenrolled in the Users window (denoted by a
Table 5.2: User Fields
on page
10
for more information. See the reader manual for instructions on how to set the
Verify on ID only (no biometric verification)
10
for more information. When you enroll the user at a reader,
10
on page
for more information.
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
