Schlage PIB300 User Manual page 957

Configuration Tab
Security Settings Screen
The Security Settings Screen controls
the passwords needed to access the
menus in the reader.
Generally the default passwords shown
above are adequate since a user must
be set up with the appropriate Authority
level on the User edit screen in the
Users window (see Edit a User
9), and the user must know how to
get to these menus in the reader before
the passwords below would do any
good.
Edit Security Settings
1. Click the Configuration tab.
2. Select the network in which the
reader you want to edit exists in the
network drop-down box.
3. Select the reader you want to edit from the reader drop-down box.
4. Click the Edit selected reader button.
5. Click the Security settings button.
6. Edit the passwords. See
7. Click the Accept settings button.
Table 10.5: Security Settings Fields
Field Req'd
Service Yes
Setup Yes
Management Yes
Enrollment Yes
Security Yes
For more detail on the reader menus, see the reader manual.
28 • Schlage • HandNet Lite Terminal User's Guide
on page
Figure 10.6: Security Settings Screen
Table 10.5: Security Settings
Description
Allows the master reader display the status of all readers on the network
Controls reader setup including the reader's address, ID length, auxiliary output settings, facility
codes, network configuration, the duress indicator, etc. It also contains an option to upgrade the
maximum number of users
Allows display of a list all of the users in the reader and lets the master reader send/acquire user
databases to/from readers in a network
Allows you to add or remove users
Allows you to customize user settings, control how closely user fingerprints must match
templates, set the menu passwords, clear all the users from reader, etc
Fields.