Schlage PIB300 User Manual page 878

Appendix B: ProxXLator
Overview
The ProxXLator application is included with Schlage Express to help the user with deriving proximity card data. The Data Input
section allows the user to derive the proximity card raw data from the card's Hotstamp, Facility Code and Version number. The
Split Data section allows the user to extract Bit Data along with Hotstamp, Facility Code and Version information using known card
formats.
To open the ProxXLator application, do one of the following:
• Double Click on the ProxXLator shortcut icon that was installed during the Schlage Express installation
• Go to Start Menu>All Programs>Schlage>Launch ProxXLator.exe
Data Input
The Data Input window of the ProxXLator
application opens automatically when the
application is started. It can also be accessed by
clicking on the Data Input tab at the top of the
window.
Hotstamp No Field: This is where the Hotstamp of
the proximity credential will be entered.
Facility Code Field: This is where the Facility
Code of the proximity credential will be entered.
Version Field: This is where the Version number
(if applicable) of the proximity credential will be
entered.
Convert button: Clicking this button converts the
information in the above fields and displays that
information Prox Data field.
Prox Data Field: This field shows the converted
proximity data once the above fields have been
entered and the Convert button has been clicked.
Copy Button: This button is used to add the information in the Prox Data field to the clip board. The information can then be
pasted into Schlage Express.
Prox Card Format Section: Lists all the Card Formats that are supported by the ProxXLator application and allows the user to
select which format is in use.
Schlage • Schlage Express Software Manual • 91