Figure 4-6 Demo Mode Confirmation Message
5. Configure the following terminal settings:
The following settings can only be used when the terminal is in Demo mode or
Standalone. Once you leave Demo Mode, these setting values will not be used
in Network mode; instead they will be set by your host application.
a. Set Locale Time Zone.
See "Set LocaleTimezone" on page 63 for more information.
b. Set the date.
See "Set Terminal Date" on page 61 for more information.
c. Set the time.
See "Set Terminal Time" on page 63 for more information.
Setting Up the GT-Series Terminal
GT-Series Terminal User's Guide - 43