Schlage PIB300 User Manual page 1017

Hide thumbs Also See for PIB300:

Table of Contents

Programming the HandPunch

Management Menu

The Management menu commands allow you to manage employee data stored in a

HandPunch unit. The following section provides a brief summary of the employee data

that may be manipulated on a HandPunch unit.

Enter the appropriate password to enter the Setup command menu. Once you have

entered the command menu, there are three options available for navigating the

command menu system.

to enter the command shown on the display.

to step to the next command in the menu.

to exit the command menu (pressing any numeric key also exits the

command menu). If you are in a command's sub-menu, press

completely exit the command menu.

There are four commands available from the Management command menu.

• List Users

• Set User Data

Refer to Table 7 and identify the command you need to perform. Step through all previous

commands until you reach the desired command.

Table 7: Setup Command Menu

Password = 3

Set User Data

multiple times to

Show Quick Links

Chapters

Table of Contents