Schlage PIB300 User Manual page 676

5. Let go of the COLDBOOT button and indicate what to erase:
• To erase only the reader's setup: Press 1 for Warm boot. This resets the reader's
setup to the factory default settings, but it keeps all users. (If you have upgraded
the reader's memory so the reader can store more users, erasing the reader's
setup does not affect this; you will still have the expanded user memory.)
• To erase the reader's setup and all users and passwords: Press 2 for Cold boot.
This resets the reader to the factory default settings, and it permanently erases
all users in the reader.
After the process is done, you see a message that the tells you that the process is
complete, and then you see the Ready display.
HandKey II Manual
27