Schlage PIB300 User Manual page 960

Configuration Tab
Enabling a Secondary Finger Later
If users are enrolled with Seconday finger mode disabled, only one finger will be collected. If Secondary finger mode is later
changed, all users need to be removed and re-enrolled in order to obtain a template for the second finger. The first finger will still
function normally, but the second finger functionality will not be available until the user is re-enolled.
Interpreting the Format Detail
In the explanation of the format detail, you'll see an elaboration on the format
that looks like Figure 10.8: Format
The numbers at the top: Identify the bit numbers; this example has 26 bits.
F: Indicates which bits contain the facility code; in this example, bits 2-9
have the facility code.
I: Indicates which bits contain the ID; in this example, bits 10-25 contain the
ID.
P/E/O/X/.: P indicates a parity bit; the E under the first parity bit here indicates that this parity is even. The X's following indicate
which bits are used to determine that parity bit; the periods following indicate that those bits are not used in determining that parity
bit; in this example, bits 2-13 are used to determine parity bit 1, and bits 14-26 do not affect this parity bit. The O under the second
parity bit (bit 26) indicates this parity bit is odd; the preceding X's indicate that bits 14-25 are used to determine this parity bit.
For a list of available card formats, see
Managing FingerKey Card Formats
Most users don't need to define additional formats; the predefined formats that we initially provide cover almost all situations.
However, if you need some other Wiegand format, you can define any format that you want.
We don't recommend changing or deleting any of our standard card formats. If you need a format that is similar to one of our
existing formats, choose to add a new format; there's an option on the screen that lets you clone (copy) an existing format; you can
then change the copy rather than changing the original.
Add a Card Format
1. Click the Configuration tab.
2. Click the Create new card format button.
3. Complete the fields on the screen. See
4. Click the Accept settings button.
Edit a Card Format
1. Click the Configuration tab.
2. Select the card format you want to edit from the drop-down box.
3. Click the Edit selected card format button.
4. Make changes to the fields on the screen. See
5. Click the Accept settings button.
Delete a Card Format
1. Click the Configuration tab.
2. Select the card format you want to edit from the drop-down box.
3. Click the Edit selected card format button.
4. Click the delete check box.
5. Click the Accept settings button.
Detail.
Table 10.7: Card Format Fields
Table 10.7: Card Format Fields
Table 10.7: Card Format Fields
12345678901234567890123456
PFFFFFFFFIIIIIIIIIIIIIIIIP
EXXXXXXXXXXXX.............
.............XXXXXXXXXXXXO
Figure 10.8: Format Detail
on page 32.
on page 32 for more information.
on page 32 for more information.
Schlage • HandNet Lite Terminal User's Guide • 31
1 2