Schlage PIB300 User Manual page 939

Users Tab
Table 5.2: User Fields
Field Req'd?
Unique Identifier Yes
First Name Yes
Middle Initial No
Last Name Yes
Important Date No
Credential ID Yes
Biometric Threshold Yes
Authority Level Yes
Access Profile Yes
Verify on ID only No
(no biometric
verification)
Use Second Finger No
as Duress Alarm
(FingerKey only)
Delete User No
10 • Schlage • HandNet Lite Terminal User's Guide
Description
• Up to 30 characters (any combination of letters, numbers, spaces, or special characters)
• If user was added from the reader, will initially match credential ID in the reader but can be
changed.
• User's first name
• If user was added at the reader, will initially match the credential ID
• User's middle initial
• User's last name
• If user was added at the reader, will initially match the credential ID
• Used to distinguish between users with similar names
• Type a date directly into the entry box using the format Thursday, January 01, 2009
• Click the drop-down button to select the date from a calendar.
• User's credential ID
• ID number from user's card (when card readers are used) or the number a user
enters manually at the reader. See the reader's manual for help with designing an
ID numbering system.
• Controls how closely user's finger or hand must match the stored template in order
for access to be granted.
• Reader default uses the Reject Threshold from the reader's setup. See
threshold on page 26 for more information. In most cases, Reader default is the
appropriate choice.
• To override the reader's reject threshold, choose from values of 30-250 in the drop
down list (common values of 250, 150, 75, 50, and 30 are singled out at the top).
• Use a lower number for higher security.
• Use a higher number if a user has trouble gaining access. See the reader's manual
for more information.
• Determines what menus the user can access at the reader.
• Each level gives access to all the lower levels.
• See Table 5.3: Authority Levels
• Controls which readers the user can use.
• Always allows access to all readers.
• Never blocks access to all readers.
• Additional choices correspond to the profiles configured in the Access tab. See
Access Tab 45
on page
• Check for users who fingerprints or hand cannot be scanned
• Since bypassing finger or hand recognition gives you reduced security, only
use this as a last resort. See
information.
• When checked, user's second finger will be used as a duress indicator.
• Check to delete user from HandNet Lite.
• User will be deleted from HandNet Lite and from all connected readers when you
click the Accept button.
on page 11 for more information.
for more information.
Adding a Special User
Reject
8
on page for more