Schlage PIB300 User Manual page 1203

Reject Override Changed: Someone changed the reject threshold for an
individual user using the command menus in the reader. Generally this
setting is controlled in HandNet with the Override setting on the Security
screen in User Properties; HandNet users would not typically change this
at the reader (if you change this or other user settings in HandNet, you just
see the message User Properties Changed).
Reject Threshold Set: Someone changed the reject threshold using the
command menus in the reader. Generally this setting is controlled from
HandNet using Reject Threshold on the Configuration tab in Reader
Properties rather than from the reader (if you change this or other settings
for the reader in HandNet, you just see the message Reader Properties
Changed).
Remote Enrollment Started: A user was enrolled with the Enroll option on the
Reader menu (for users enrolled from the Command menu on the reader,
you see the message User Enrolled); see page 87 for more about enrolling
users.
Report Engine Unavailable: You should never see this message.
Request to Exit Activated: A user has pressed the Request to Exit button in
order to get out of the secure area.
Score Is: You should never see this message.
Site Added: A site was added to HandNet.
Site Code Changed: The site code was changed using the Command menus
in the reader.
Site Connected: HandNet is set up to connect with the site by modem, and
HandNet connected to the site.
Site Deleted: A site was deleted in HandNet.
Site Disconnected: HandNet is set up to connect with the site by modem, and
HandNet disconnected from the site when it was done communicating with
the site.
Site Properties Changed: In HandNet, one or more changes were made to the
Site Properties; for more about Site Properties, see page 34.
Special Enrollment: The Command menus in the reader was used to enroll a
user who does not require hand recognition to gain access.
Supervisor Override: You should not see this message.
System Re-calibrated: Someone recalibrated the reader; see page 124.
System Settings Changed: Someone changed one or more entries on one of
the System Settings tabs that you get to with settings on the View menu;
for more about system settings, see page 22.
Tamper Activated: Someone has shaken the reader roughly or has opened the
reader. Unless someone was servicing the reader, this message generally
HandNet for Windows
121