User Properties, Security - Schlage PIB300 User Manual

Adding and Maintaining Users
User Properties,
Security
92
The Security tab controls what this user has access to and when.
Select an access profile to control which readers the user can use
at what times: Click this entry for a list of available access profiles. If
this user can use all readers at all times, choose Always. If you do not
want the user to be able to use any readers at this point, choose Never.
For other access, select the appropriate profile. You must set access
profiles up before they are available here.
Select an authority level to allow users to access reader commands:
This determines what the user can do at the reader. For most users,
None is the appropriate choice.
Each higher level gives access to the lower levels as well. For example,
a user with an authority level of four can also use the Level one, two
and three menus. Except for recalibrating the reader (part of level 1),
and enrolling a user if you have not purchased the upgrade to the full
feature set, HandNet can control every setting in the reader, so there is
generally no need to control settings through the reader menus.
None: This lets the reader gain access through the reader, but not use
the command menus in the reader to change the reader's settings.
This choice is appropriate for most users.
(1) Service: This lets you recalibrate the reader and change the
reader's status display.
(2) Setup: This lets you control reader setup issues including how the
reader is connected to your computer network, what language the
reader displays in, the date/time, etc.
(3) Management: This lets you list users.
(4) Enrollment: This lets you add or remove users.
(5) Security: This lets you control the passwords for the reader menus,
change time zones, enroll users who do not need hand access, etc.
See the HandKey manual for more on directly changing settings through the
reader.