Schlage PIB300 User Manual page 667

Secure Setup Guidelines
18
8. Type the new authority level and press enter.
The new authority level is shown on the bottom of the display. This must be a value
between 0 (zero) and 5. For example, the display above shows a new authority level
of 5. Make sure you enter the value for the authority level you wish to grant; see What
Each Authority Level Lets You Access on page 16.
After you type the new authority level and press enter, the reader returns you to the
Set User Authority display.
9. To change the authority level for another user, repeat the process beginning with step
6 above.
To step back to a previous menu level, you can press the * button.
10. When done changing user authority levels, press the clear key until you are out of the
reader menus.
0
ENTER NEW VALUE
5