Getting To The List Of Time Zones; Adding Or Changing Time Zones; Deleting Time Zones; Time Zone Definition Screen - Schlage PIB300 User Manual

Settings That Control User Access
Getting to the List
of Time Zones
Adding or
Changing Time
Zones
Deleting Time
Zones
Time Zone
Definition Screen
62
1. Click the View menu.
2. Click Time Zones. You see a screen like the one below (though the time
zones listed will be different). From here you can add, change, or delete time
zones.
The first time zone is Always and the last (#61) is Never; you cannot change
either of these.
To add a time zone, click one of the blank lines in the time zone list and click
Edit. To change a time zone, click the time zone to change and click Edit.
Change the Time Zone Definition screen (see below) as needed and then click
OK to return to this list. You can then add or change another or click Close when
done.
Click the time zone and click Delete. The program asks if you are sure you want
to delete the time zone. Click Yes.
If you try to delete a time zone and get a message that the time zone is used in
an access profile, you must close the time zone window, go to access profiles
and select a different time zone for each reader that had this time zone selected
if you still want to delete it.
This screen determines what hours access is available on different days of the
week. A time zone is active if the time is equal to or after the start time and
before the stop time, and if the day of the week matches one of those checked.
Name: Enter a name that will be clear to you so that when you associate the
time zone with a reader in an access profile, you will be sure to pick the right
one.
You can assign four different periods in each time zone if you need them; for
example, if you want to give access during different hours on different days. Be
sure to leave lines that you do not need blank.