Schlage PIB300 User Manual page 584

Chapter 4 Configuring the Database Communication to Kiosks
Coercivity
a) - The three options are High, Medium, and Low with High being the default.
must match the magstripe badges the customer buys otherwise it will not encode properly and may
damage the cards.
Note:
High Coercivity cards are standard.
COM Port
b) - Specify which COM Port the card encoder is connected to. For dedicated Kiosks this
needs to be set to 1. For Desktop/Laptop Kiosks this can be set from 1 - 255 depending on which COM
Port the encoder is connected to.
Baud Rate
c) - Specify at what speed the kiosk communicates with the encoder. 9600 is recommended.
Enabled
7 - Click this box to enable the kiosk after all the settings have been entered. If this box is left
unchecked the kiosk will not function.
Save and Close
8 Click to save the kiosk and return to the kiosk Configuration window.
19
This option