Adding A Group Of Users At Once; Beginning The Process - Schlage PIB300 User Manual

Adding a Group of Users at Once

Beginning the
Process
You would add a group of users at once if you have to add many new users
with the same access profile and other security access options, and if you want
HandNet to automatically assign sequential ID numbers (if each user needs a
different access profile, if you need to assign non-sequential ID numbers, or if
you want to fill in custom user entries while adding the users, add single users
instead; see Adding a Single New User on page 76).
1. Click the User menu and then click Add New.... This takes you to the
first screen of the New User Wizard.
2. Click Add multiple new users, and then click Next.
Q
3. On the screen that asks for the number of users and starting ID, enter
U
the number of users to create, and the ID number for the first new user.
I
Click Next to continue.
C
4. On the Security screen, choose the access profile to assign to each
of the new users. If needed, you can change the authority level and
K
limited access. Do NOT change the user reject threshold. If you need to,
you can later change this individually for a user who is having access
S
problems. Click Next to continue.
T
5. The next screen shows the progress in adding the users. Once the
E
process is done, click Finish.
6. You need to enroll the users before they have access. Typically, you will
P
also rename the users since adding multiple users at once uses the ID
S
number for the name.
7. If you have set up custom user entries, you will also want to edit the
Properties for each user, click the Custom tab, and fill the appropriate
information in there.
To begin adding a new user, pick Add New... from the User menu.
Click the Radio button by Add Multiple Users, and then click the Next button.
Adding Multiple Users
HandNet for Windows
81