Schlage PIB300 User Manual page 361

Management Menu
Navigating the
Management
Menu
Management
Commands
List Users
The Management menu commands allow you to manage employee data stored in a
HandReader.
Once you have entered the Management menu, there are three options available for
navigating the command menu system.
• Press to enter the command shown on the display.
• Press to step to the next command in the menu.
• Press to exit the command menu (pressing any numeric key also exits the command
menu). If you are in a command's sub-menu, you may have to press multiple times to
completely exit the command menu.
There are three commands available from the Management command menu.
• List Users – display or print a list of all the users enrolled in a HandReader.
• Data From Network – upload data from the network to the master HandReader.
• Data To Network – download data from a master HandReader to the network.
Refer to Table 10 and identify the command you need to perform. Step through all
previous commands until you reach the desired command.
Table 13-10: Management Command Menu
Management Menu
Password = 3
List Users
Display or Print
Data from Network
Select Reader
Data to Network
a
All Readers (Y/N)
Select Reader
a. Master controller only.
The List Users command displays or prints a list of all the users enrolled in a
HandReader. The list is shown, one user at a time, on the HandReader's display, or it
is printed by a serial printer attached to the HandReader being polled or to a printer
attached to the Master HandReader in a HandReader network. Before displaying the user
list, the amount of memory available for enrolling more users is displayed.
45