Program Claims To Be A Demonstration Version; Software Expired - Schlage PIB300 User Manual

Program
Claims to be a
Demonstration
Version
Software
Expired
have to dial 9 for an outside line, and the number was a long distance call
that required by 1 and an area code, you would enter the number like this:
9, 18025551212
5. Make sure the modem is hooked up to a phone line.
6. Make sure the phone line is plugged into the right jack on the modem
connected to your computer (most modems have two jacks: one labeled
Line and one labeled Phone. The phone wire from the phone jack on the
wall must connect to the jack on the modem labeled Line.
7. Make sure the phone line has a dial tone (hook up a regular phone to the
modem jack labeled Phone to see if you hear a dial tone; if you do not, there
is a problem with the jack or phone line).
8. Make sure no other phone, fax machine, or modem is trying to use the
same phone line.
9. Make sure call waiting is not on for this line.
10. On the Schedule tab in Site Properties, make sure you have set up a time
for this site to connect. Make sure this connection time is enabled (checked).
When HandNet for Windows is installed, it is in demonstration mode: it gives
you full functionality for fourteen days, and after that it limits the use of certain
features.
If you purchase a previous Version of HandNet for Windows, you are
also authorized to use this Version, but you must register it first, even if
you registered your previous Version. Once you send us your registration
information, we will give you an authorization code that makes the program
permanently functional.
To register this copy of HandNet, please pick Registration from the File menu
and follow the instructions on that screen (we would just repeat the instructions
here, but you need the unique ID number that is shown on that screen and you
also need to print the registration form).
If you really do have a demonstration Version, please contact us to find out how
to purchase a full Version.
After the first time you use this Version of HandNet, you have fourteen days
to register it. You must register even if you registered your previous Version of
HandNet. If you do not register within fourteen days, you will not be able to log
in. When you try to log in, you see this message:
If you get this message, exit HandNet and then restart. This brings up the
registration screen. Send us the information requested on that screen. Once
we get your information, we will send you an activation code to enter on the
registration screen. This will make HandNet permanently functional.
HandNet for Windows
131