Table of Contents
Advertisement
Setting Up the Site/Quick Start
Adding System Operators
Adding system operators enables you and other staff members to have log in access to the Schlage Express software. After you
add at least one System Operator with all privileges, remember to delete the default Manager and Operator.
1.
In the Main Menu, select Settings
> Operator Settings. The
Operators window will open.
2.
Click Add at bottom of Manager
pane to add a System Operator
with all privileges (manager). The
Add Manager window will open.
Î NOTE: Managers have access to
all Schlage Express functionality.
3.
In the Add Manager window:
•
Enter the person's name (4 to
20 characters).
•
Enter a password (1 to 8
characters).
•
Re-enter password.
•
Click OK. The Add Manager window will close and the
person is added to the Manager pane of the Operators
window. Repeat these steps for any additional Managers.
4.
Click Add at bottom of Operator pane to add a System
Operator with Door Programming privileges only (operator).
The Add Programmer window will open.
Î NOTE: Operators have restricted access; that is, they can
only open a facility and program locks.
5.
In the Add Programmer window:
•
Enter the person's name (4 to 20 characters).
•
Enter a password (1 to 8 characters).
•
Re-enter password.
•
Click OK. The Add Programmer window will close and
the person is added to the Operator pane of the
Operators window. Repeat these steps for any additional
Operators.
6.
After you add all System Operators, delete the default
Manager and Operator entries.
7.
Click Close.
Schlage • Schlage Express Software Manual • 27
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
