Message Types - Schlage PIB300 User Manual

Message Types

The readers selected below: To limit the report/view to specific users,
click this and then select the users to include activity for.
To select a single user: Click that user in the list.
To select multiple users that are together on the list: Click the first
user in the group, hold the SHIFT key down, and click the last
user that you want to select.
To select multiple users that are not together on the list: Click the first
user to select, hold the CTRL key down, and click each other user that
you want to select.
This screen lets you limit the activity included to particular kinds of
messages. If you need only specific messages within a category, use the
Messages tab instead.
Any message: This includes activity regardless of what type of message it
generates.
The messages types checked below: Click this and then check any
message type to include. You can check more than one box to include
multiple types of messages.
Acknowledgement: This does not list anything.
Alarm: This lists any message that generates an alarm. Which
messages generate alarms is controlled by your choices on the
Alarms tab in System Settings. If you change which messages
generate alarms, messages that did not generate an alarm when
they occurred will not be listed, even if they would generate an
alarm now.
Invalid Access Attempt: This lists any message where someone tries
to get access and cannot. This includes the messages Identity
Unknown, Access Denied, and Access Refused, Time Zone.
Operator Logs: This lists when operators log in or log out of
HandNet, and it lists invalid login attempts. It does not list the
addition of new operators or changes to the operator settings;
only when each operator uses the system.
Setup Changed: This lists any setup changes made directly using
command mode at the reader. For setup changes made through
HandNet, use System Database.
HandNet for Windows
111