Schlage PIB300 User Manual page 832

Stock List
The Stock List feature is used to load iButtons and cards into the system in bulk. These credentials can then be selected and
assigned to a user.
Note: This menu is only available if Enable Quick Loading of Stock Credentials is selected in the Preferences menu. Only
credentials that have been enabled in the Preferences menu will be available in the Stock List menu.
Stock List iButtons
From here the user can Add, Find, Trash and Mark as Lost any iButton credential in the system.
Add iButtons to the Stock List
1. Click Stock List > iButtons.
Click Add.
2.
The Touch Button box will appear. While this box is visible,
3.
touch the iButton to the iButton reader.
4. If you have more iButtons to enter, touch each iButton to the
reader until all of them are entered
5. Press the Esc key on your keyboard after all the iButtons
have been entered.
Find an iButton in the System
1. Click Stock List > iButtons.
Click Find.
2.
3. When the box below appears, touch the iButton you want to
find in the system to the iButton reader.
4. If the iButton is in use in the system, it will be displayed.
• If the iButton is assigned to a user, the following box will
appear. Click OK to close the box.
• If the iButton is in the stock list, it will be highlighted in
the stock list window.
Schlage • Schlage Express Software Manual • 45