Schlage PIB300 User Manual page 854

Users
How to Import Users
To import a list of users into
Schlage Express a text (.txt) file
must first be created with the user
information. This file can have any
information that is found in the
Users Definition section. Any
additional information can be
ignored. User information in the
text file can be delineated by a
space, a tab, a colon, semi-colon,
or any other Operator defined
ASCII character (not including any
alphanumeric values or the
apostrophe).
In the example below a text file
with information delineated by tab
is being used.
To import a text file:
1. On the Main page of Schlage
Express go to
Facility>Import>User Import
from Text File. The Text File
Import window will open.
2. Click the Browse button to
open the Select File Import window.
3. Navigate to the text file and click Open.
4. The Select File window will
close and the text file will be
previewed in the File Contents
Preview section.
5. OPTIONAL: At this point if a
Layout Template has been
created it can be selected using the Layout Template drop down box. A Layout Template will set all the other options (Column
Delimiter, Skip Lines, Auto Generate PIN, Column Order, etc.) in the Text Import File utility. Layout Templates can save time
and should be considered if a lot of importing from different .txt files, all with the same layout, is being done.
Î In this example a layout template will not be used so the [None] option will be selected.
6. Use the Column Delimiter drop down to select how the information is delimited in the text file.
Î In this example the information is delimited with a Tab so the [Tab] option will be selected.
Schlage • Schlage Express Software Manual • 67