Schlage PIB300 User Manual page 888

• After each step of a procedure, the red and green LEDs will alternately flash several times,
indicating the step was performed successfully. WAIT for the flashing to stop before continuing.
• If at any time the red LED remains on while the green LED flashes, an error has occurred
A green flashing error code is repeated three times (with a pause in between each set of flashes).
Count the number of green flashes to determine error code, then consult Error Code chart below.
• Entered codes must be 3-8 digits in length. Keep a log of all issued codes. Issue codes exclusively
with all odd or all even numbers, this practice will make it easier to spot duplicate codes - since each
keypad button represents two numbers (for example, code 246 is identical to code 135).
Add Add
Normal Use Toggle
code code
Prog. Code R Prog. Code R
3 3 R
3 R
1 9 1 R
NewCode R NewCode R
R
to add more to add more
R
to complete to complete
Flashes Error Code Description
Code too long, 8 digits max.
2
3 Memory full, must delete some codes
4 Use Change Programming procedure
5 Second entry did not match first (Prog. Code)
6 Invalid entry, start over (verify any codes entered prior to this error, they may operate the lock)
Manually Program User Codes
Add
Freeze/Lockout
code
Prog. Code R
3 3 R
1 1 5 R
NewCode R
R R
to add more
R R
to complete
Change
Programming Code
(5 Digit min.)
Prog. Code R
7 R
NewCode R
NewCode R
Completed
Form 57002-A (pg 1 of 2) 09/11/06
Schlage PRO and Von Duprin PRO Series
Add
One Time Use
code
Prog. Code R
3 3 R
1 1 3 R
NewCode R
R
to add more
R
to complete
Delete Change
a code
Relock Time
Prog. Code R Prog. Code R
5 R 9 9 R
OldCode R
Press and release
delete more
1 for each sec.
and / or
5 for every 5 sec.
to complete
R R to complete
Flashes Error Code Description
Code to be deleted does not exist
7
8 Code too short, 3 digit min.
9 Duplicate code, code already exists
Add
Supervised
code
Prog. Code R
3 3 R
1 1 7 R
NewCode R
R
to add more
R
to complete
1 R
Add
Pass Thru
code
Prog. Code R
3 3 R
1 1 9 R
NewCode R
R
to add more
R
to complete