Who Can Use Handnet; Adding Or Changing An Operator; Which Options The Operator Can Use; Deleting An Operator - Schlage PIB300 User Manual

System Wide Settings

Who Can Use HandNet

Adding or
Changing an
Operator
Which Options
the Operator
Can Use
Deleting an
Operator
24
The Operators tab lists those people
who are authorized to use the
HandNet program. When you click
Add or Edit, the program brings up
the Operator Definition box where you
control which tasks the operator is
allowed to do in HandNet.
To get to this screen, pick Settings
from the View menu, and then click the
Operators tab.
You see this box when you add or
edit an operator. It has the name
and password the operator must
use to log into HandNet. The boxes
that are checked control which
types of activities the operator can
do.
Name: Enter the name that the
operator will enter on the
Login screen; see page 4. If
the operator is also a user in
HandNet (so s/he can gain
access through readers), the
name you enter here does NOT
have be the same as the name
in User Properties.
Password: Enter the password that the operator will enter on the Login screen.
Passwords are NOT case sensitive. For example, if the password is narnia,
Narnia and NARNIA would work identically.
Access Rights: Check the corresponding boxes to determine which tasks the
operator can do in HandNet. When you add a new operator, all of the boxes
are unchecked; unless you check them, the operator will be able to do little
more than look at information on the screen.
Click OK to save your changes and return to the list of operators.
To delete an operator so that person will no longer have access to HandNet,
click the operator in the list and click Delete. HandNet does NOT ask you to
confirm this deletion, so make sure you have highlighted the right operator
before you click delete.
If the operator is also a user and if you do not want the user to have access to
readers anymore, you must also delete the person from the user list.
* * * * *