Other Ongoing Activities; Reader Maintenance; Cleaning Readers; Recalibrating Readers - Schlage PIB300 User Manual

Hide thumbs Also See for PIB300:

Table of Contents

Other Ongoing Activities

Recalibrating

You should periodically clean hand readers; if you do not, users may get

rejected more often.

Spray any ordinary, non-abrasive cleaner on a clean cloth, and then use the

cloth to wipe the platen, the mirror and reflector on the sides of reader, and the

window above the platen. When wiping the platen, start from the back corners

and wipe forward.

Never spray cleaning fluid directly onto the reader! Always spray a cloth and

then wipe the reader with the cloth.

Never use an abrasive or gritty cleaner! An abrasive cleaner could scratch

the reader; this would damage it.

If users are often being rejected at a particular reader, try recalibrating it. To do

1. Check the list of users to make sure you have an authority level of one or

higher. If you have an authority level of None, you cannot do this (to change

your authority level, double-click your name on the list of users, click the

Security tab, click the Authority Level entry, and select the appropriate level).

2. Go to the reader to be recalibrated, and enter command mode on the

If you have a HandKey II or HandKey CR reader: Press CLEAR, and

then press ENTER.

If you have an ID3D HandKey reader: Press # AND * (you can press

them at the same time, or one after the other).

The display on the reader should look like this:

3. Type your User ID number (the same one you enter to get access through

the reader), and press ENTER or #. The reader asks you to place your

ENTER PASSWORD

Show Quick Links

Table of Contents