Typical" Settings; Getting Exported Users To Another Computer - Schlage PIB300 User Manual

System Wide Settings
Export Settings
"Typical"
Settings
Getting
Exported Users
to Another
Computer
30
Types: This controls what user information HandNet exports.
Add New: If this box is checked and you add a user, HandNet exports the
user. Normally you do not want this box checked; you usually want
HandNet to wait until the user is enrolled before exporting the user. If
you have this checked, HandNet exports the unenrolled user.
Enroll: If this box is checked, then HandNet exports a new user after the
user is enrolled.
Update: If this box is checked and change information for a user, HandNet
exports the changed information. This can help keep user information
the same on all of the computers.
Delete: If this box is checked and you delete a user, HandNet exports
the fact that the user was deleted. If the other copies of HandNet are
set up to import deletions, then the user will be removed from those
computers as well.
Empty Templates: If you add or change a user that has not been enrolled yet,
this controls whether or not HandNet will export it. Normally you only want
HandNet to export users after they are enrolled, so you would leave this set to
Skip.
These buttons automatically check the appropriate options for two situations:
Typically Enabled Settings: This checks the appropriate boxes for a
computer to be able to automatically import and export users.
Typically Disabled Settings: This unchecks all of the boxes; this is
appropriate for any user who is not running HandNet on more than one
computer.
See Setting Up for Common Situations on page 28 for more on common setups.
See Importing Users from Another Copy of HandNet on page 99 for more on how
to get the exported user information to the other computer so you can import
them there.
* * * * *