Schlage PIB300 User Manual page 1024

Hide thumbs Also See for PIB300:

Table of Contents

HandPunch Maintenance

Cleaning the

A minimum amount of system maintenance is required to keep HandPunchs fully

functional. HandPunchs should be cleaned periodically to prevent an accumulation

of dust from affecting the HandPunch's readability. User Scores should be reviewed

periodically to ensure the HandPunch is performing properly.

There are NO user serviceable parts inside the HandPunch.

Once a HandPunch system is in operation there are two HandPunch commands that can

assist with system maintenance. These commands are performed through the Service

Menu. The instructions for these commands begin on page 24.

• Calibrate – View HandPunch exposure values.

• Status Display – Display HandPunch input/output status, the hand read score of the

last user to verify on the system.

Inspect and clean the HandPunch regularly to maintain optimum performance. Clean

the platen, side mirror, reflector, and the window above the platen using a clean cloth

dampened with ordinary, non-abrasive window cleaner (see Figure 9-1). Start at the rear

corners of the platen and work your way forward.

DO NOT SPRAY CLEANING FLUID DIRECTLY INTO OR ON THE HandPunch.

Figure 9-1: HandPunch Cleaning

Show Quick Links

Chapters

Table of Contents