Schlage PIB300 User Manual page 1014

Hide thumbs Also See for PIB300:

Table of Contents

The Setup menu commands allow you to set the basic operating parameters for the

HandPunch unit. The following section provides a brief summary of all the parameters

that may be set on a HandPunch unit.

Once in the Command Menu, you can step through and set the parameters for each

command sequentially. You do not have to exit command mode after setting any

individual command.

Enter the appropriate password to enter the Setup command menu. Once you have

entered the command menu, there are three options available for navigating the

command menu system.

to enter the command shown on the display.

to step to the next command in the menu.

to exit the command menu (pressing any numeric key also exits the

command menu). If you are in a command's sub-menu, press

completely exit the command menu.

There are six commands available from the Setup command menu.

• Set Language

• Set Date Format

• Set Date and Time

• Set Address

• Set ID Length

• Set Serial

Refer to Table 6 on page 30 and identify the command you need to perform. Step through

all previous commands until you reach the desired command.

HandPunch 1000 Manual

multiple times to

Show Quick Links

Chapters

Table of Contents