Schlage PIB300 User Manual page 671

Enrolling and Maintaining Users
For DX-2200
Readers
(iCLASS)
22
6. Type the ID number of the user to enroll and press enter.
You'll now see:
7. Have the user place and remove his/her finger on the reader each time when asked.
The reader should ask the user to place his/her finger twice; if it asks for the finger
more than twice, the user isn't placing his/her finger consistently; go over the
instructions for correct finger placement.
Once the user places the finger correctly two times consecutively, the reader asks
the user to place the alternate finger if the Set Secondary Finger setting in the Setup
menu requires this (see page 40):
Follow the same procedure as with the first finger. The reader accepts any finger as
the alternate finger (including the primary finger).
If the alternate finger is being used for duress, make sure the user places a different
finger for the alternate finger.
8. Once the user has successfully placed the required finger(s), the reader briefly
flashes the message User Enrollment Successful and then displays:
Press ENTER to enroll another user if needed, or press clear until you are out of the
reader menus.
If you have a DX-2200 reader, that is, a reader that supports iCLASS cards, your
enrollment options will be slightly different; see Adding Users on a DX-2200 (iCLASS) on
page 45 for more details).
PLACE PRIMARY FINGER
PLACE ALTERNATE
FINGER
ADD USERS
*BACK #NEXT