Introduction; What Handnet Does; Registering Handnet; New Features In Version 2.0 - Schlage PIB300 User Manual

Getting Started

Introduction

What HandNet
Does
Registering
HandNet
New Features in
Version 2.0
How to tell if I
have access to
the new features
HandNet for Windows lets you control and monitor many connected HandKey
readers. In this one program, you can control who can use each reader and
when. You can also monitor activity and alarms for all readers at once.
After the first time you use this Version of HandNet, you have fourteen days to
register it. You must register it even if you registered your previous Version of
HandNet. If you do not register it within fourteen days, you will not be able to
log into the program. The process should only take a minute.
1. If you have not logged into HandNet yet, log in; see page 4.
2. If the registration screen is not shown, pick Register
from the File menu, and click the Print the registration
form button on that screen.
3. Fill the form out and fax it to the number at the top
of the form. Once we receive your completed form,
we will fax an activation code back to you within two
business days (since it could take two days for us
to send your code back, please print and send the
registration form now; do not wait until day fourteen).
4. Pick Register from the File menu, enter the activation
code we sent, and click the Activate button. Once
you do this, HandNet is permanently functional.
HandNet for Windows Version 2.0 provides a number of
new features, but these are only available to you if you purchased the upgrade
to the full feature set. If you did not purchase this upgrade and you would like
to, please contact your dealer; once you pay for the upgrade, we will send you a
new access code to enter on the Registration screen. Once you enter this code,
all the new features are immediately available to you.
1. From the main menu bar, click the Help menu, and then click About
HandNet for Windows.
2. Check the bottom of the box that pops up. To be able to use the new
features, the last line must say You may use all features of this software.
If this line says Your current license does not let you use the enroll..., you
must contact your dealer and upgrade your license before you can use
the new features (once you upgrade, we willsend you an access code that
makes these feature available).
1