User Menu - Schlage PIB300 User Manual

User Menu

The User menu lets you add users, delete
users, rename users, change information for
a selected user, and create custom entries
to collect additional information about users
(if you have already set up users in a reader
that you are connecting to HandNet, do
not recreate those users; you can Upload
Users from the reader; see Getting User
Information from a Reader on page 99).
To change, delete, or rename users, select
a user first on the list of users (for the list of users, pick Users from the View
menu, or press CTRL-U).
Add New: This lets you add new users; see page 74. After you add the user, you
must enroll the user (see page 87) before the user will have access through the
readers.
Delete: This lets you remove a user from the program. You would do this if you
never wanted that user to be able to use any of the readers in the HandNet
network (if you might need the user again but want to keep the user from
using any of the readers, you can also change the user's access profile to
Never).
Rename: This lets you rename the selected user. You would use this if you
entered the user's name incorrectly. You would also use this if you added
multiple users at once. When you use Add multiple new users to add a
number of users automatically, the program uses the ID number for the name.
You would want to rename these users so you could identify which ID is for
which user.
Properties: This lets you look at or change information for the selected user;
see Changing Users on page 90.
DB Properties: This gives you a summary of the total numbers of enrolled
and unenrolled users. It also lets you add custom entries so you can collect
additional information about users. For example, depending on your needs,
you might collect emergency phone numbers, birthdays, employment start
dates, or any other information you needed about your users; see Adding
Custom User Entries on page 97.
HandNet for Windows
17