Schlage PIB300 User Manual page 423

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy, and, if not installed and used in accordance with the
Installation Manual, may cause unwanted interference to radio communications.
Operation of this equipment in a residential area is likely to cause unwanted
interference, in which case the user will be required to correct the interference at the
user's own expense.
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numerique de la classe A respecte toutes les exigences du Reglemente
sure le materiel brouilleur du Canada.
© 2012 Ingersoll Rand – ALL RIGHTS RESERVED
Document Part Number: 70100-7500 – Revision D – March 2012
Recognition Systems Company, LLC (dba Schlage Biometrics)
Schlage, GT-400, HandKey, HandReader, HandPunch and BackHand are trademarks
of Schlage Lock Company LLC, Ingersoll-Rand Company, and/or their affiliates.
All other trademarks are owned by their respective owners.
Schlage Biometrics reserves the right to change, without notice, product offerings or
specifications.
No part of this publication may be reproduced in any form without the express written
permission of an Officer of Schlage Biometrics.