Which Messages Trigger Alarms; Messages That Cause Alarms; Alarms Sounds - Schlage PIB300 User Manual

Which Messages Trigger Alarms

Messages That
Cause Alarms

Alarms Sounds

The Alarms tab controls which activities generate alarms in HandNet. To get to
this screen, pick Settings from the View menu, and then click the Alarms tab.
Messages Which Cause Alarms: Check each message that should generate
an alarm. What you check here only determines what triggers an alarm in
the HandNet program; if you are connected to an auxiliary or external alarm
system, actions that trigger external alarms are controlled by the Auxiliary
(AUX) Settings (see page 48) and Extended Setup (see page 51) tabs in Reader
Properties.
Enable Alarm Sounds: If this is checked, then when an alarm situation occurs,
a loud, siren-like alarm sound will begin and continue until you acknowledge
the alarm. If this is not checked, when an alarm situation occurs, you will
see a red flashing message at the bottom of the screen but will not hear any
sound.
* * * * *
HandNet for Windows
25