Schlage PIB300 User Manual page 873

Programming a Lock
Programming a Lock Using a HHD
To program a lock using the HHD you must first:
1. Set up the doors in your system and create program files for those doors. See Generating Program Files on page 83 for
more information.
2. Couple the HHD to the Door you wish to program.
3. Program the Lock for the first time. Follow the steps below for coupling and programming locks.
Coupling
1. Connect the HHD to
the lock.
2. Select Start on the
HHD.
3. Select Schlage Utility
Software (SUS) from
the program menu.
The SUS login screen
will open.
4. Select Manager from
the Log on drop down.
5. Enter password into
the password field
(default is 123456)
6. Click Log On. The
main screen will open.
7. Start communication
between the HHD and
the lock (see specific
lock for details).
86 • Schlage • Schlage Express Software Manual
8. Click on Device
Options. The Device
Options screen will
open.
9. Put the lock in
coupling mode (see
specific lock for
details)
10. Click on Couple HHD
to Device option. Once
the lock has been
coupled to the HHD
you will not need to
repeat this step unless
you use a different
HHD.