Ip Address - Schlage PIB300 User Manual

Changing or Deleting
a Scheduled
Communication Time
If You Get a Message
that the Time
Conflicts

IP Address

Even though HandNet lets you see the scheduled connection times for all sites,
HandNet only lets you change a scheduled time for the site with which you are
currently working. To change a scheduled time for a different site, you must go
to the properties for that site, select the scheduled time there, and then click the
Edit button.
If the time that you enter conflicts with the time that HandNet is already
scheduled to communicate with a different site, you see a message like this:
Make sure that each other scheduled connection has a disconnect time. If you
schedule a connection with no end time, HandNet would never disconnect from
that site, so it would not be possible to schedule another connection. If you want
to have more than one scheduled connection, each connection must have a
disconnect time.
Also make sure the connect time is at least one minute later than the disconnect
time for the previous connection. For example, if another connection is
scheduled to end at 5:00, the new connection can be scheduled for 5:01, but
not for 5:00.
You see this screen if you indicate that HandNet will communicate with this site
through a network.
when adding a new site
IP address: Each site must have a unique IP address. Ask your network
administrator for an appropriate address. The address you enter here must
match the address you enter in the reader; see Configuring the Physical Reader
on page 54 for more on how to change the address in the reader.
Port: This entry no longer applies; it is always grayed out.
HandNet for Windows
when changing a site
39