Schlage PIB300 User Manual page 874

Programming a Lock
Programming
Before you can program a
lock with the HHD, you
must generate program
files and transfer them to
the HHD. See Generating
Program Files on page
83 for more information.
1. Bring the HHD and
either the USB cable
or the Serial Cable
with the CIP attached
to it, to the lock that
needs programming.
Do not plug the USB/
CIP into the lock at
this time.
2. Select Start on the
HHD.
3. Select Schlage Utility Software (SUS) from the program
menu. The SUS login screen will open.
4. Select Manager from the Log on drop down.
5. Enter password into the password field (default is 123456)
6. Click Log On. The
main screen will open.
7. Connect the HHD to
the lock using the USB
or CIP cables.
8. Start communication
between the HHD and
the lock (see specific
locks for details)
.
9. Click on Device
Options. The Device
Options screen will
open.
10. Click on Program
Lock.
11. Select the Lock you
wish to program from
the list and Click OK.
12. Click Yes.
13. Click Ok. The lock is
now programmed.
Schlage • Schlage Express Software Manual • 87