User Cards: Initialization
Preparing the MIFARE cards for operation in a project
requires the following aspects:
Defining a card layout (where on the card will
the applications store and retrieve their data?)
Defining key sets for the user cards
Initializing the cards (put the keys on the card
trailers). Take note, that sector 2 and 3 have
read access with Key A and write access with
key B.
Initializing the cards for the different applications
(put startup information on the card)
Keyset for type 1 cards, public keys need to be replaced
by keys relevant to your project. (right)
Keyset for type 2 cards, public keys need to be replaced
by keys relevant to your project. (right)